STRUCTURAL CHARACTERISTICS

PUMP BODY: cast iron, with UIN ISO 228/1 gas threaded suction and delivery openings,
threaded side openings for installing a pressure gauge and pressure switch.
PUMP BODY COVER: cast iron,serving also as mechanical seal horsing.
EJECTOR UNION: plastic PPO (approved for drinking water).
IMPELLER: brass, centrifugal radial flow.
MOTOR SHAFT: AISI 314 stainless steel.
MECHANICAL SEAL: ceramic and graphite.
MOTOR:
The pumps are coupled to an asynchronous, high efficiency TEK induction
motor of suitable size, which is quiet, closed and externally ventilated,
suitable for continuous duty.
The thermal cutout replay (motor protector ) is incorporated in all single
phase motors.
Three phase motors require an adequate external motor protector, with
connections according to current standards.
INSULATION: class B (Class F)
PROTCTION: IP 44.
OPERATING LIMITS: Fluid temperature up to+40℃
Maximum ambient temperature: +40℃

 

Model	Power		Q.Max	H.Max	S.Max	Pipe Dia.	Packing Dim.	G.W	Qty/20ft	R.P.M	Ampere
	KW	HP	L/min	m	m	mm	mm	kg	pcs		1~220V	3~380V
JSP-100	0.33	0.45	40	35	9	25x25	410x170x180	10.2	1320	2850	2.7	-
JSP-255	0.37	0.5	45	38	9	25x25	410x170x180	14	1320	2850	3	-
JSP-355	0.55	0.75	50	45	9	25x25	460x210x230	15.1	1320	2850	3.6	-
JSP-455	0.75	1	60	48	9	25x25	460x210x230	16	800	2850	4.8	-
JSP-555	1.1	1.5	80	56	9	32x32	590x218x258	26	800	2850	7.5	2.7
JSP-655	1.5	2	100	60	9	40x40	590x218x258	27.5	800	2850	9.6	3.5
JSP-755	2.2	3	130	65	9	40x40	590x228x258	29	800	2850	13.5	5