STRUCTURAL CHARACTERISTICS
PUMP BODY:
Made from fiberglass reinforced technopolymer, with UIN ISO 228/1 gas
threaded suction and delivery openings.
PUMP BODY COVER: aluminium, serving also as mechanical seal horsing.
IMPELLER: . plastic PPO
MOTOR SHAFT: AISI 314 stainless steel,
MECHANICAL SEAL: ceramic and graphite,
MOTOR:
The pumps are coupled to an asynchronous, high efficiency TEK induction
motor of suitable size, which is quiet, closed and externally ventilated,
suitable for continuous duty.
The thermal cutout replay (motor protector ) is incorporated in all single
phase motors.
Three phase motors require an adequate external motor protector, with
connections according to current standards.
INSULATION: Class B (Class F)
PROTECTION: IP 44.

 

Model	Power		Flow	Head	Pipe Dia.	L×W×H	G.W/N.W
	Kw	HP	L/min	m	mm	(mm)	(kg)
TW-250	0.25	0.33	120	6.5	Φ32mm	420×180×245	5.1
TW-280	0.28	0.37	130	7	Φ32mm	420×180×245	5.2
TW-370	0.37	0.5	180	9	Φ50mm	420×180×245	8.1
TW-550	0.55	0.75	215	10	Φ50mm	559×240×315	9.0
TW-750	0.75	1	240	11	Φ50mm	559×240×315	9.0
TW-900	0.9	1.2	300	13	Φ50mm	559×240×315	10.5
TW-1100	1.1	1.5	460	18	Φ63/Φ60	610×275×335	17.7/17.5
TW-1500	1.5	2	530	17	Φ63/Φ60	610×275×335	19.6/17.9
TW-2200	2.2	3	585	20	Φ63/Φ60	610×275×335	21.7/19.5
TW-2600	2.6	3.5	650	20	Φ63/Φ60	610×275×335	23.1/21.7
TW-3000	3.0	4.0	680	21	Φ63/Φ60	610×275×335	21.7